There isn't the menu for using RDI Flash Programmer

In the "Getting Started User's Guide", there is a guide sucs as below. But I can't see the "RDI Interface Driver" in the full-down menu. there are just "Ulink ARM Debugger" and " Ulink Cortex-M3 Debugger" What's the problem? I am using MDK for ARM 3.02a version.

----------------
Use RDI Flash Programmer
Some RDI Drivers (such as the Segger J-LINK) provide Flash download features. These drivers are configured as shown below:

In the dialog Project - Options for Target - Utilities select as Target Driver for Flash Programming the RDI Interface Driver.

Click the button Settings and select J-LINK Flash Programmer.

 RE: There isn't the menu for using RDI Flash Programmer

Does this help?

http://www.keil.com/support/docs/3162.htm

Jon

 RE: There isn't the menu for using RDI Flash Programmer

Thanks for your reply.

I already all licenses for using J-Link. So it's not a problem of licenses.

In case of MKD-ARM V2.5, there is the menu for RDI interface in the dialog Project - Options for Target - Utilities. But in case of MDK-ARM V3.02a, There isn't

What's the problem.