|
|||
| Products Download Events Support Videos | |||
UART0 and LPC2148
Next Thread | Thread List | Previous Thread Start a Thread | Settings
| Details | Message |
|---|---|
|
Read-Only
Author
Karl Benkic Posted
19-Jun-2006 13:30 GMT Toolset
ARM |
 UART0 and LPC2148Karl Benkic
Hello!I'm quite new at LPC21XX world and in the beginning I stumble at UART0 problem. I can get it right. I copied example program from Phillips site, try to correct it and no luck. When ever I try to program my KEIL MCB2140 board with ULINK and have UART0 connected I get "NO JTAG device found". Can any one help me on that? Best regards, Karl |
|
Read-Only
Author
Reinhard Keil Posted
19-Jun-2006 17:08 GMT Toolset
ARM |
RE: UART0 and LPC2148 Reinhard Keil
Might be that you disable the JTAG interface by accident. Take a look to:http://www.keil.com/support/docs/2993.htm |
Next Thread | Thread List | Previous Thread Start a Thread | Settings
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
