KEIL V5.06 update 5 (build 528) -- L6200E -- Any way to allow this ?

Hi,

I have setup Unity testing framework into Keil uvision 5 with code generated by STM32CubeMx, testing is working fine for one file at a time, but when I try to run more than one test file I am facing the following issue.

Error: L6200E: Symbol setUp multiply defined (by tim10_11_led1_2__unity_1\testmain.o and tim10_11_led1_2__unity_1\testgpio.o).

Error: L6200E: Symbol tearDown multiply defined (by tim10_11_led1_2__unity_1\testmain.o and tim10_11_led1_2__unity_1\testgpio.o)

As you can see, using setUp and tearDown methods in 2 test files invoke this error. Note: I am not defining them in header files, just using them in test sources.

My request is to find a compiler flag or linker flag I can add to the configuration so that Keil wont complain about these methods. They are needed in every test file. and I need to run multiple test files in one run.

Enviroment info:

IDE-Version:
µVision V5.24.2.0
Copyright (C) 2017 ARM Ltd and ARM Germany GmbH. All rights reserved.

Tool Version Numbers:
Toolchain: MDK-ARM Professional Version: 5.24.1
Toolchain Path: C:\Keil_v5\ARM\ARMCC\Bin
C Compiler: Armcc.exe V5.06 update 5 (build 528)
Assembler: Armasm.exe V5.06 update 5 (build 528)
Linker/Locator: ArmLink.exe V5.06 update 5 (build 528)
Library Manager: ArmAr.exe V5.06 update 5 (build 528)
Hex Converter: FromElf.exe V5.06 update 5 (build 528)
CPU DLL: SARMCM3.DLL V5.24.1
Dialog DLL: DCM.DLL V1.16.0.0

Dialog DLL: TCM.DLL V1.32.0.0

Test file example:

/**
  ******************************************************************************
  * File Name          : Testgpio.c
  * Description        : GPIO module Tester
  ******************************************************************************
  ** COPYRIGHT(c) 2017 Eslam El-Sherbieny
  *
  * Summary: Testing GPIO module methods
  *
  *
  *
  ******************************************************************************
  */

#include "unity.h"
#include "gpio.h"

uint16_t LED_ORed;
GPIO_InitTypeDef GPIO_InitStruct;

/* Test Setup */
void setUp(void){


        /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOB_CLK_ENABLE();

        /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(GPIOB, LED_1_Pin|LED3_Pin|LED2_Pin, GPIO_PIN_RESET);

        LED_ORed = LED_1_Pin|LED2_Pin|LED3_Pin;


}

/* Test Teardown */
void tearDown(void){

}

/**
  * Test: test_MX_GPIO_Init
  * Target method: MX_GPIO_Init
  * Parent method:
  *
  * @brief GPIO Initialization
  *
  * @param GPIO_InitStruct GPIO structure
  * @param GPIO_InitStruct.Pin GPIO Pin variable
  * @param LED_ORed The value or ORing the 3 LEDs
  */
void test_MX_GPIO_Init(void){

        TEST_ASSERT_EQUAL_UINT32(GPIO_InitStruct.Pin, LED_ORed);

}