Could anyone help me with this can code? This is from the team that made the corexxx board. The license is in the code and is ok to distribute.
I compiled the code but I see no talk on either can channel with my analyzer to the pins directly nor in my can sniffer with transceivers. s000.tinyupload.com/index.php
I emailed the openxxx team but being non English speaking I think they were confused. I have the stm32f205rbt chip.
Well there's that, and the fact they have no margin to provide technical support, so pretty much here's the hardware and demo code, batteries not included, have fun.
Code looks to have external dependencies. Make sure the defines for pins, clocks, peripherals, etc are correct. The F2 and F4 implementations for CAN are identical, suggest review of code examples in SPL and DSP library releases for EVAL series boards.
community.st.com/.../24847 community.st.com/.../62695 community.st.com/.../64849
Open to reasonable offers for my time
What kills me is their usb example (using same dependencies) work, and there is a lot more involved with usb then can. Also I can blink leds in the can example when oscillating pins. I was also able to make the official kiel can example work so I know my hardware is good.
"Open to reasonable offers for my time" is that a signature or an offer? I just need frame work for can1 + can2 + usb to work. I have examples of each but just can not make it all work together.