Keil Logo

Restricted Version Problem

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details Message
Author
abdullah al rafi
Posted
8-Jun-2017 08:12 GMT
Toolset
C51
New! Restricted Version Problem

i am using keil Uvision 4. When i try to build the target those are showing.

Build target 'Target 1'
linking...
BL51 BANKED LINKER/LOCATER V6.22 - SN: Eval Version
COPYRIGHT KEIL ELEKTRONIK GmbH 1987 - 2009
"STARTUP.obj",
".\8tx_20jan2017.obj"
TO "TX1"
RAMSIZE(256)
*** WARNING L16: UNCALLED SEGMENT, IGNORED FOR OVERLAY PROCESS SEGMENT: ?PR?_DISPALY1?8TX_20JAN2017
******************************************************************************
* RESTRICTED VERSION WITH 0800H BYTE CODE SIZE LIMIT; USED: 0E2DH BYTE (177%) *
******************************************************************************
Program Size: data=121.0 xdata=0 code=4598
LINK/LOCATE RUN COMPLETE. 1 WARNING(S), 0 ERROR(S)
*** WARNING L16: UNCALLED SEGMENT, IGNORED FOR OVERLAY PROCESS SEGMENT: ?PR?_DISPALY1?8TX_20JAN2017
*** FATAL ERROR L250: CODE SIZE LIMIT IN RESTRICTED VERSION EXCEEDED MODULE: C:\KEIL\C51\LIB\C51S.LIB (-----) LIMIT: 0800H BYTES
Target not created

what is the solution?

Author
Boris Johnson
Posted
8-Jun-2017 08:52 GMT
Toolset
C51
New! RE: Restricted Version Problem

Hmmm. That's a toughie.

Might be worth doing something to GET RID OF THE RESTRICTION

Author
Andrew Neil
Posted
8-Jun-2017 11:57 GMT
Toolset
C51
New! RE: what is the solution?


http://www.keil.com/forum/5215/

#NotRocketScience

Author
Abdullah al rafi
Posted
8-Jun-2017 12:05 GMT
Toolset
C51
New! RE: what is the solution

How can i get the full version. I am a student i need this soft for a project .. without buying this soft did have any other way .. Thanks

Author
Andrew Neil
Posted
8-Jun-2017 12:20 GMT
Toolset
C51
New! RE: I am a student i need this soft for a project

If your school has set you this project, then the school should provide the necessary tools for it.

Otherwise, part of your job in choosing what microcontroller to use is to ensure that you can access suitable tools for it.

Note that Silicon Labs, for one, have free Keil tools for their 8051-based microcontrollers...

Author
Abdullah al rafi
Posted
8-Jun-2017 12:51 GMT
Toolset
C51
New! RE: I am a student i need this soft for a project

No school did not give me that project . I am making this project for learing .did keil have any trial version?? If yes please give me the link
Thanks

Author
Andrew Neil
Posted
8-Jun-2017 12:58 GMT
Toolset
None
New! RE:I am making this project for learning

SO you should now have learned a very important lesson: that tool availability is an essential part of your microcontroller selection!

"did keil have any trial version?"

You are using the Trial version!!

Author
Abdullah al rafi
Posted
8-Jun-2017 13:09 GMT
Toolset
None
New! RE:I am making this project for learning

What can i do now .. what is your suggestions?

Thanks

Author
Boris Johnson
Posted
8-Jun-2017 13:27 GMT
Toolset
None
New! What can i do now .. what is your suggestions?

1 - Pay for it
2 - Look for a free alternative (maybe SDCC)
3 - Look at an 8x51 chip that Keil provide a free tool for
4 - Look at a totally different family of chip (maybe ARM)
5 - Use your head (consider research)
6 - Give up and admit you don't have the stamina to take the idea further

Author
Andrew Neil
Posted
8-Jun-2017 13:34 GMT
Toolset
None
New! RE:What can i do now

Perhaps you should concentrate on your course work?

Hopefully, by the end of that, you will have developed the skills to deal with this kind of question?

Author
erik malund
Posted
8-Jun-2017 15:56 GMT
Toolset
None
New! RE:What can i do now

use a SiLabs 8051

Author
Tamir Michael
Posted
12-Jun-2017 08:06 GMT
Toolset
None
New! RE:What can i do now

LPCXpresso is much cheap that uv, but is restricted to LPC products:

http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-cortex-m-mcus
/lpc1100-cortex-m0-plus-m0/lpcxpresso-ide-v8.2.2:LPCXPRESSO

Author
Tamir Michael
Posted
12-Jun-2017 08:08 GMT
Toolset
None
New! RE:What can i do now

Note the bottom of the page I've linked to: the free version is limited to 256[KB] - which seems to satisfy your needs - if you are willing to use LPC chips instead.

Author
erik malund
Posted
12-Jun-2017 15:18 GMT
Toolset
None
New! RE:What can i do now

if not, as said, use SiLabs, it comes with a free full Keil

Next Thread | Thread List | Previous Thread Start a Thread | Settings

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.