My DK51 (v7.01) behaves like an evaluation version.

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details	Message
Read-Only Author Bo Kuang Posted 14-Oct-2004 14:50 GMT Toolset None	My DK51 (v7.01) behaves like an evaluation version. Bo Kuang I met problem when using DK51 (version 7.01)with ADuc831 microconverter. My developers kit behave like an evaluation version. I have installed an evaluation version before, and removed it when installing the formal version. I have tried: 1. old version. 2. remove all the projects (including .obj files and all other files). 3. reinstall the software (with S/N). 4. Make sure the LX51 option is not checked. However, the code size is still limited to 2k bytes for linking. Anyone has met the same problem before? Any suggestions are greatly appreciated.
Read-Only Author erik malund Posted 14-Oct-2004 15:08 GMT Toolset None	RE: My DK51 (v7.01) behaves like an evaluation version. erik malund However, the code size is still limited to 2k bytes for linking. Anyone has met the same problem before? Any suggestions are greatly appreciated. It happened to me once when I installed something else that included a free Keil eval. Anyhow, I found that there are two (or is it 3) steps in the installation that will lead you to eval result if you answer wrong. Take your time when installing. Erik
Read-Only Author Keil Support, Intl. Posted 14-Oct-2004 16:04 GMT Toolset None	RE: My DK51 (v7.01) behaves like an evaluation version. Keil Support, Intl. You need to rebuild all OBJ files with the full version as explained under: http://www.keil.com/support/docs/1209.htm
Read-Only Author BO KUANG Posted 18-Oct-2004 22:12 GMT Toolset C51	RE: My DK51 (v7.01) behaves like an evaluation version. BO KUANG Thanks to all. The problem is solved... Really appreciate your helps.

Next Thread | Thread List | Previous Thread Start a Thread | Settings