| Details |
Message |
|
Read-Only
Author
rohan rohan
Posted
3-Jun-2004 10:20 GMT
Toolset
C51
|
 how to create .exe file rohan rohan
How to create .EXE files?
|
|
|
Read-Only
Author
m d
Posted
3-Jun-2004 11:42 GMT
Toolset
C51
|
RE: how to create .exe file m d
Does this qualify as the stupidest ever question on this forum?
|
|
|
Read-Only
Author
rohan rohan
Posted
3-Jun-2004 11:45 GMT
Toolset
C51
|
RE: how to create .exe file rohan rohan
if u know the answer try to give otherwise please carry u r work
|
|
|
Read-Only
Author
m d
Posted
3-Jun-2004 12:30 GMT
Toolset
C51
|
RE: how to create .exe file m d
Your question showed such a complete lack of understanding of what the Keil tools are for that I thought your question was stupid, sorry.
The idea of creating .exe files from Keil does not make a lot of sense unless you have ported MSDOS/windows to an 8052
|
|
|
Read-Only
Author
Andrew Neil
Posted
3-Jun-2004 14:01 GMT
Toolset
C51
|
RE: how to create .exe file Andrew Neil
"unless you have ported MSDOS/windows to an 8052"
Which, in itself, makes no sense!
|
|
|
Read-Only
Author
erik malund
Posted
3-Jun-2004 13:41 GMT
Toolset
C51
|
RE: how to create .exe file erik malund
if u know the answer try to give otherwise please carry u r work
If your willingness to figure this out is on par with your willingness to write (you) then good riddance.
Erik
|
|
|
Read-Only
Author
Stefan Duncanson
Posted
3-Jun-2004 13:45 GMT
Toolset
C51
|
RE: how to create .exe file Stefan Duncanson
"Does this qualify as the stupidest ever question on this forum?"
It's well up there but I fear Mr. Rohan Rohan does not quite take first prize. Sadly.
|
|
|
Read-Only
Author
Andrew Neil
Posted
3-Jun-2004 13:10 GMT
Toolset
C51
|
RE: how to create .exe file Andrew Neil
If, by ".EXE file", you mean something to run on a PC under MS-DOS or windows, then YOU CANNOT DO THIS WITH THE KEIL TOOLS!
If, on the other hand, the ".EXE" bit is a red herring and you do actually want to know how to create something to run on an 8051, then you need to read the uVision Getting Started Guide - and work through the example Projects in it.
This will walk you through the whole process, and give you a proper introduction to the tools.
|
|
|
Read-Only
Author
Drew Davis
Posted
3-Jun-2004 19:39 GMT
Toolset
C51
|
RE: how to create .exe file Drew Davis
My answer to the original question: "Press the F7 key".
I fear Mr. Rohan Rohan does not quite take first prize
First prize, then, I must see. A link, perhaps?
|
|
|
Read-Only
Author
Eduard Jadron
Posted
4-Jun-2004 09:32 GMT
Toolset
C51
|
RE: how to create .exe file Eduard Jadron
What ???
|
|
