What should i do if my schematic only use (0x8000-0xffff) as xdata

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details	Message
Read-Only Author Jason Yung Posted 9-Feb-2004 10:13 GMT Toolset C51	What should i do if my schematic only use (0x8000-0xffff) as xdata Jason Yung should i config startup.a51 or do u have some steps to follow thx Jason
Read-Only Author Alex Ruiz Posted 9-Feb-2004 11:54 GMT Toolset C51	RE: What should i do if my schematic only use (0x8000-0xffff) as xdata Alex Ruiz You may take a look at.: http://www.keil.com/support/docs/1296.htm It may or may not be required to change startup.a51, it depends on what you are trying to do... UVision 2 Getting start with ( Manual ) should also give you information on setting XDATA memory range. Alex

Next Thread | Thread List | Previous Thread Start a Thread | Settings