Running Application Without Debugger

Details	Message
Read-Only Author Kitty Fields Posted 11-Sep-2003 03:34 GMT Toolset C166	Running Application Without Debugger Kitty Fields Is there any way to compile and download an application without the debugger present. I don't need the debug features, and just want to compile, load, and run the application. Thanks for any help.

Read-Only Author Dejan Durdenic Posted 11-Sep-2003 07:12 GMT Toolset C166	RE: Running Application Without Debugger Dejan Durdenic Then just compile,burn EPROM or FLASH on your board and run...I don't see where's the problem? Dejan

Read-Only Author erik malund Posted 11-Sep-2003 14:00 GMT Toolset C166	RE: Running Application Without Debugger erik malund Then just compile,burn EPROM or FLASH on your board and run or, even simpler, use an ISP chip Erik

Read-Only Author Al Bradford Posted 11-Sep-2003 18:17 GMT Toolset C166	RE: Running Application Without Debugger Al Bradford Are you creating a HEX file? Look at your Output Tab for the check box. The Hex file does not contain Debug info. As pointed out in this thread, the Debugger is not require to download, however, the Debugger will support a number of Flash Utilities to support download from the Debugger. You can go to the Infineon web site for additional stand alone Flash utiites.