interfacing stepper motor with 89c51

Next Thread | Thread List | Previous Thread Start a Thread | Settings

Details	Message
Read-Only Author kamal kumar Posted 11-Jul-2003 10:20 GMT Toolset None	interfacing stepper motor with 89c51 kamal kumar i don't know how to connect tyhe wires of the stepper motor along with the 89c51 . there are totally 6 wires in it . and the motors type is KP39HM4-018 and it seems to be japanese make that works for 5v. the colors of the wires are 1 brown , 2 red , 1 black , 1 yellow and 1 orange .
Read-Only Author Stefan Duncanson Posted 11-Jul-2003 11:12 GMT Toolset None	RE: interfacing stepper motor with 89c51 Stefan Duncanson This forum is intended for Keil tools, not stepper motors. Perhaps you should find a stepper motor forum? Stefan
Read-Only Author Andrew Neil Posted 11-Jul-2003 11:31 GMT Toolset None	RE: interfacing stepper motor with 89c51 Andrew Neil "Perhaps you should find a stepper motor forum?" And the data sheet for your motor!
Read-Only Author Graham Cole Posted 11-Jul-2003 11:42 GMT Toolset None	RE: interfacing stepper motor with 89c51 Graham Cole There are many types of stepper motor. Looking at this thread may be a good start. http://www.keil.com/forum/docs/thread2715.asp
Read-Only Author Daniel Onofri Posted 27-Apr-2004 12:38 GMT Toolset None	RE: interfacing stepper motor with 89c51 Daniel Onofri perhaps deberías ser mas amable con la gente que necesita información.
Read-Only Author Stefan Duncanson Posted 27-Apr-2004 13:42 GMT Toolset None	RE: interfacing stepper motor with 89c51 Stefan Duncanson "perhaps deberías ser mas amable con la gente que necesita información." No. Hay reglas aqui. Y tu - escribes en espanol cuando los otros escriben en ingles. Porque?

Next Thread | Thread List | Previous Thread Start a Thread | Settings