This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

JTAG Daisy Chaining problem

Using Keil µVision 4.20 and SEGGER J-Link (with software provided by µVision) it seems not to be possible to select an ARM7-core of an JTAG (Daisy) chain.

The GUI of the driver "J-Link/J-Trace" seems to simplistic to accomplish this.

(However for an Cortex-M3 based project the driver „Cortex-M/R J-Link/J-Trace“ (shown automatically by Keil µVision) shows JTAG (Daisy) Chaining, etc.)

How can JTAG Daisy Chaining support be accomplished for an ARM7 core (ADUC7060) (BTW the cores are always identified by the SEGGER J-Link commander)?

Many thanks in advance!