Is there any information available for setting up the ethernet port on the MCBTMS570 development board?
From the schematic, I can see that the ethernet is controlled by the OMAP-L137 which in turn is connected to the EMIF of the TMS570. The question is, how to set up the EMIF to be able to communicate with the OMAP? Is there any example code or app note regarding this?
The schematic for the board shows EMIF_A15 from the TMS570 being connected to both UHPI_HDS2 and UHPI_HRW on the OMAP - is this correct?
Thanks,
Charlie.