This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Clear MIC_RSR register on LPC3250

Hi,
I'm looking to set up the LPC3250's high speed timer to generate an interrupt, but I'm unable to clear the MIC_RSR register. At the moment even though I have the internal match interrupts for the high speed timer disabled, the hs timer interrupt bit (0x20) is still set on the MIC_RSR and I'm unable to clear that bit by writing (0x20) to it.
Does anyone have any suggestions?
Thanks,
Paul