I need help to convert (compile) a calculator project, to hex file to program macrocontroller. i give you the project. please help me because i am a beginer in macrocontroller.
You mean microcontroller? A macrocontroller would be something quite different!
micro = very small; macro = large!
To leanr about programming in general, here are some books to get you started: http://www.keil.com/books/
To find how to use a particular tool chain, you will need to study its manuals: http://www.keil.com/support/man/
hi, if you already have the asseembly code, use Keil to build the project, but before you do so, you'll need to do the following setting first.
from the main menu, go to project>options for target "target 1" could be target 2,3 ..etc
then from the top menu find "Output" and make sure you have "create HEX file" is selected. then build or compile your code.
you should find the hex file at the root at where your code is created.
If you have Assembler source code, then the translation process is called "Assembling" ( not "Compiling") and is done using an Assembler (not a Compiler)