Keil forum help on initialization file (*.ini)

State Not Answered
Locked Locked
Replies 5 replies
Subscribers 15 subscribers
Views 6703 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

help on initialization file (*.ini)

ilaa raj over 13 years ago

hi
where to get help about initialization (*.ini) files?
how to start?

0 Tamiryan Michael over 13 years ago

What?
Cancel
Up 0 Down

Cancel
0 rank amateur over 13 years ago

you can initialise a .ini file with the command

echo STUPID QUESTION > myinifile.ini
Cancel
Up 0 Down

Cancel
0 Andy Neil over 13 years ago

Please read the manual?

http://www.keil.com/support/man/docs/uv4/uv4_debugging.htm

http://www.keil.com/support/man/docs/uv4/uv4_dg_debug.htm

http://www.keil.com/support/man/docs/uv4/uv4_debug_functions.htm
Cancel
Up 0 Down

Cancel
0 rank amateur over 13 years ago in reply to Andy Neil

Please read the manual?

support.microsoft.com/.../289022
Cancel
Up 0 Down

Cancel
0 ilaa raj over 13 years ago in reply to rank amateur

i have an example project downloaded from net for lpc3250. in target option under debug tab RAM.ini file is linked. without this file control is not entering to main. In lpc2468 without ini file we can debug/program. but here in lpc3250 some problem is there. this is what my confusion. sample file is

/***RAM.ini***/

FUNC void Setup (void) {
// <o> Program Entry Point PC = 0x08000000;
} Setup(); // Setup for Running
Cancel
Up 0 Down

Cancel