Keil forum The KEILC is not installing in my PC

State Not Answered
Locked Locked
Replies 4 replies
Subscribers 15 subscribers
Views 4040 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

The KEILC is not installing in my PC

Murthy r over 14 years ago

Hi All,

I have a Keil RealView MDK v3.15b.exe File.

When i am trying to install this file I am getting

Following message

"Checksum Error The Installation file is corrupted and installation must be terminated "

How to solve this issue..?

With regards,
Murthy.R

0 Stefan Hartwig over 14 years ago

As far as you can read your installation file is corrupted
Try to download the file again and have a new try.
Cancel
Up 0 Down

Cancel
0 Christoph Franck over 14 years ago in reply to Stefan Hartwig

As far as you can read your installation file is corrupted
Try to download the file again and have a new try.

Another, more remote possibility would be that the computers memory is defective. If the problem persists even after downloading the file again, run some memory tests.
Cancel
Up 0 Down

Cancel
0 Andy Neil over 14 years ago in reply to Stefan Hartwig

If you can't get a good download, and you're sure it's not a fault in your PC hardware, you can request a CD:

www.keil.com/.../cdrom.asp
Cancel
Up 0 Down

Cancel
0 Murthy r over 14 years ago in reply to Andy Neil

thanks to all. i have tried with some other version of the exe file.the same result i got. so that i requested a CD.

Thanks & Regards,
Murthy.R
Cancel
Up 0 Down

Cancel