STM32 shared interrupt vector

 STM32 shared interrupt vector

Hi all,

in writting my orginal question, I found part of the anwser I was asking so what follows is the second part!

I need to do something similar to the following link relating to a C167 but on the STM32:
http://www.keil.com/support/docs/1075.htm

Could someone point me in the right direction (pun intended).

TIA, Dave

 RE: STM32 shared interrupt vector

Look-up NVIC_SetVectorTable in the ST FWLib...

 RE: STM32 shared interrupt vector

Thanks Andy, I had seen NIC_SetVectorTable but perhaps not fully assimilated it.

In the boot loader I call

SetVectorTable(NVIC_VectTab_FLASH,0);

To call the user application:
The bootloader jumps to the application base address, effectively its reset vector.

SetVectorTable(NVIC_VectTab_FLASH, app_base_address - NVIC_VectTab_FLASH);

(making sure the base address is on a 1k boundary)

Is my thinking along the right lines?