 | Discussion Forum |  |
|
|
COMMAND ISONext Thread | Thread List | Previous Thread Start a Thread | Settings | Details | Message |
|---|
Read-Only Author
changuel khemaies Posted
14-Jan-2002 10:51 GMT Toolset
C51 |  COMMAND ISO changuel khemaies
Previous | Next | Reply
help
Date: Jan 12, 2002 3:05 CST
Name: changuel khemaies
Product: C51
--------------------------------------------------------------------------------
can you explain me with détail this command:
92h conf [conf] Lnout <Data> Lnin [cwt] [bwt]
is
<Data>
can contain an ISO command like a writer command (14h CLA INS A1 A2 data)
thanks
| | Read-Only Author
Andrew Neil Posted
14-Jan-2002 11:06 GMT Toolset
C51 | RE: COMMAND ISO Andrew Neil Is this a C51 question? | | Read-Only Author
Jon Ward Posted
14-Jan-2002 18:01 GMT Toolset
C51 | RE: COMMAND ISO Jon Ward Wow,
Look at the pretty letters!
Jon | | Read-Only Author
Mike Kleshov Posted
14-Jan-2002 13:32 GMT Toolset
C51 | RE: COMMAND ISO Mike Kleshov The answer:
No, I don't think anyone here can explain the command. | | Read-Only Author
Scott deWolski Posted
14-Jan-2002 18:43 GMT Toolset
C51 | RE: COMMAND ISO Scott deWolski Based on your previous postings I would guess this is a command string for a printer or card reader. As such, nobody is going to be able to help you without knowing the specific piece of equipment (and even then maybe not). Your best bet is to contact the equipment's support group or experiment with the interface using a PC and Basic, Procomm, etc.
Best luck | |
Next Thread | Thread List | Previous Thread Start a Thread | Settings |
|
