| ||||
| Home Products Download Events Support | ||||
EPM900 programmer mode
Next Thread | Thread List | Previous Thread Start a Thread | Settings
| Details | Message |
|---|---|
Read-Only Author Shunbagavalli Kuppan Posted 31-Oct-2007 09:32 GMT Toolset C51 |  EPM900 programmer modeShunbagavalli Kuppan I am using EPM 900 programmer with DP9401 development board. During programming mode i am geeting the error message as "This is not p89LPC9401 device". Wht can be reason for this? I made all the setting correctly for the EPM900 and target. |
Read-Only Author Reinhard Keil Posted 12-Nov-2007 16:15 GMT Toolset C51 | RE: EPM900 programmer mode Reinhard Keil The P89LPC9401 device just programs fine when it is correctly connected to EPM900. You need to connect the ICP of the LPC9401 device to the related EPM900 pins. There are only 5 pins needed for ICP programming. Refer to all the related information on http://www.keil.com/support/docs/2955.htm. |
Next Thread | Thread List | Previous Thread Start a Thread | Settings
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
