RL-ARM HTTP Demo for A2F-EVAL-KIT

NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT RL-ARM INSTALLED!

This is a Real-Time Library (RL-ARM) TCPnet HTTP Server example prebuild for Actel SmartFusion A2F-EVAL-KIT Board. It shows how to use the Web Server CGI interface.

This example configures the LAN network parameters for the evaluation board automatically if a DHCP Server is available in your LAN.

To use this example:

• Connect ULINK to the A2F-EVAL-KIT Board and power the board up
• In uVision - load the project file and execute Flash - Download
• Connect the A2F-EVAL-KIT Board to a LAN with DHCP server (most LANs have this)
• Connect your computer to the same LAN
• Perform a PowerOn-Reset to A2F-EVAL-KIT Board
• Open your web browser and enter the address http://smartfusion/

This opens the demo page running on the A2F-EVAL-KIT Board. Enter:

User name: admin
Password: leave blank

The WEB pages shown are included into the project under HTTP Files group.

The HTTP_demo example is available for several targets:

• A2F-EVAL-KIT: Stand-alone (no RTX Kernel) application
• A2F-EVAL-KIT Debug: Stand-alone (no RTX Kernel) with debug output
• A2F-EVAL-KIT RTX: Configured for RTX Kernel

This pre-compiled version is for target A2F-EVAL-KIT and may be downloaded using a evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 4.11 or later is required.