RL-ARM SD/MMC File Demo for MCB1700

NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT RL-ARM V3.70 INSTALLED!

This is a Real-Time Library (RL-ARM) Flash File System file manipulation example. You can create, read, copy and delete files from a SD/MMC Flash Memory Card. Also formatting the card is possible. This example project is designed to work with Keil MCB1700 Evaluation Board.

To use this example:

• Connect ULINK2 to the MCB1700 Evaluation Board and power the board.
• Connect MCB1700 Board COM1 port to PC COM port via serial cable.
• start Hyperterminal session.
  (115200 baud, 8-bits, no parity, 1 stop bit, flowcontrol none).
• In uVision - load the project file and execute Flash - Download.

In the Hyperterminal window you now have a commandline interface to manipulate files on a SD/MMC Flash Memory Card plugged into MCB1700 Evaluation Board. Type Help for a list of available commands.

The SD_FILE program is a standalone application loaded into on-chip flash and available for targets:

• MCB1700:
  Standalone application for Keil MCB1700 Board using COM1 port as a communication interface.
  Connect a serial cable to RS232 COM1 port using HyperTerminal at 115200 baud, 8-bits, no parity, 1 stop bit, flowcontrol none.

This pre-compiled version is for target "MCB1700" and may be downloaded using an evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 3.70 or later is required.