RL-ARM HTTP Demo for MCB1700

NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT RL-ARM INSTALLED!

This is a Real-Time Library (RL-ARM) TCPnet HTTP Server example prebuild for Keil MCB1700 Evaluation Board. It shows how to use the Web Server CGI interface.

This example configures the LAN network parameters for the evaluation board automatically if a DHCP Server is available in your LAN.

To use this example:

• Connect ULINK to the Keil MCB1700 Evaluation Board and power the board up
• In uVision - load the project file and execute Flash - Download
• Connect the MCB1700 Board to a LAN with DHCP server (most LANs have this)
• Connect your computer to the same LAN
• Open your web browser and enter the address http://mcb1700/

This opens the demo page running on the MCB1700 Board. Enter:

User name: admin
Password: leave blank

The WEB pages shown are included into the project under HTTP Files group.

The HTTP_demo example is available for several targets:

• MCB1700: Stand-alone (no RTX Kernel) application
• MCB1700 Debug: Stand-alone (no RTX Kernel) with debug output
• MCB1700 RTX: Configured for RTX Kernel

This pre-compiled version is for target MCB1700 and may be downloaded using a evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 3.60 or later is required.