Analog Devices ADE7169 Energy Metering Reference Design

This is the reference design for ADE7169 devices. It is a full functional energy meter with LCD display.

To run this program...

1. Connect the ADE7169 reference design hardware to the PC via serial interface cable or 1-Pin Pod
2. Set ADE7169 CPU into 'download mode'
3. Build the project (Project Menu, Build Target)
4. Start the debugger (Debug Menu, Start/Stop Debug Session)
5. Run the program (Debug Menu, Go)

A debug script (ADE7169F16_mem.ini) creates two buttons in the toolbox that read out the LCD and ADE registers and display the values in the output window.