RL-ARM SD/MMC File Demo for MCB2300

NOTE: DO NOT RECOMPILE THE EXAMPLE WITHOUT RL-ARM LICENSE!

This is a Real-Time Library (RL-ARM) Flash File System file manipulation example. You can create, read, copy and delete files from a SD/MMC Flash Memory Card. Also formatting the card is possible. This example project is designed to work with Keil MCB2300 Evaluation Board.

To use this example:

• Connect ULINK2 to the MCB2300 Evaluation Board and power the board.
• Connect MCB2300 Board COM1 port to PC COM port via serial cable.
• start Hyperterminal session.
  (115200 baud, 8-bits, no parity, 1 stop bit, XON/XOFF).
• In uVision - load the project file and execute Flash - Download.

In the Hyperterminal window you now have a commandline interface to manipulate files on a SD/MMC Flash Memory Card plugged into MCB2300 Evaluation Board. Type Help for a list of available commands.

The SD_FILE program is a standalone application loaded into on-chip flash and available for two targets:

• MCB2300:
  Standalone application for Keil MCB2300 Board using COM1 port as a communication interface.
  Connect a serial cable to RS232 COM1 port using HyperTerminal at 115200 baud, 8-bits, no parity, 1 stop bit, XON/XOFF.
• MCB2300 RT_Agent:
  Standalone application for Keil MCB2300 Board using RealTime-Agent as a communication interface.
  You can test it only with ULINK2 from uVision debugger.

This pre-compiled version is for target "MCB2300" and may be downloaded using an evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 3.05 or later is required.