XC800 Motor Control Example

This example project is written for the Infineon XC800 devices and shows the implementation and testing of a Motor Control Application. The example may be used on the following devices:

• XC866
• XC886
• XC888

The project has been provided by Infineon and can be fully tested using the µVision Device Simulator. The simulator offers you the following benefits:

• Designing the system using a simulator is safer since a failure in the code may stress the hardware (which may destroy a physical board.
• The configuration of the XC800 Devices can be easily checked and fine tuned before trying to run on hardware.
• The µVision Logic Analyzer provides an easy to use graphical interface that allows detailed algorithm verification.