Keil Logo

Peripheral Simulation

For Infineon XC2224L-20F — Timer Block GPT1 (T2, T3, T4)

Simulation support for this peripheral or feature is comprised of:

  • Dialog boxes which display and allow you to change peripheral configuration.

These simulation capabilities are described below.

Timer/Counter 2 Dialog

Timer/Counter 2

The Timer/Counter 2 dialog allows you to view and change the SFRs associated with Timer/Counter 2. This timer/counter is a general purpose unit which may be used for timing, counting, and so on.

  • Mode contains the operating mode and the input selector for the timer.
  • T2UDE is the external up/down control enable.
  • T2EUD is the external up/down control input. This value is obtained from the T2EUD input pin.
  • T2UD is the timer up/down control.
  • Direction displays whether the timer/counter counts up or down.
  • Status displays the current status of the timer.
  • T2 contains the value of the T2 SFR which is the current timer value or count.
  • T2CON contains the value of the T2CON SFR which is the current configuration for timer 2.
  • T2R is the Timer 2 Run flag.
  • T2IN is the Timer 2 Input value.
  • T2IR is the Timer 2 Interrupt Request flag.

Timer/Counter 3 Dialog

Timer/Counter 3

The Timer/Counter 3 dialog allows you to view and change the SFRs associated with Timer/Counter 3. This timer/counter is a general purpose unit which may be used for timing, counting, and so on.

  • Mode contains the operating mode and the input selector for the timer.
  • T3UDE is the external up/down control enable.
  • T3EUD is the external up/down control input. This value is obtained from the T3EUD input pin.
  • T3UD is the timer up/down control.
  • Direction displays whether the timer/counter counts up or down.
  • T3OTL is the output toggle latch flag.
  • T3OE is the timer output enable flag.
  • T3OUT is the state of the T3OUT output pin.
  • Status displays the current status of the timer.
  • T3 contains the value of the T3 SFR which is the current timer value or count.
  • T3CON contains the value of the T3CON SFR which is the current configuration for timer 3.
  • T3R is the Timer 3 Run flag.
  • T3IN is the Timer 3 Input value.
  • T3IR is the Timer 3 Interrupt Request flag.

Timer/Counter 4 Dialog

Timer/Counter 4

The Timer/Counter 4 dialog allows you to view and change the SFRs associated with Timer/Counter 4. This timer/counter is a general purpose unit which may be used for timing, counting, and so on.

  • Mode contains the operating mode and the input selector for the timer.
  • T4UDE is the external up/down control enable.
  • T4EUD is the external up/down control input. This value is obtained from the T4EUD input pin.
  • T4UD is the timer up/down control.
  • Direction displays whether the timer/counter counts up or down.
  • Status displays the current status of the timer.
  • T4 contains the value of the T4 SFR which is the current timer value or count.
  • T4CON contains the value of the T4CON SFR which is the current configuration for timer 4.
  • T4R is the Timer 4 Run flag.
  • T4IN is the Timer 4 Input value.
  • T4IR is the Timer 4 Interrupt Request flag.
Get more information about the
Peripheral Simulation Capabilities
of the µVision Debugger.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.