For NXP (founded by Philips) LPC2134/01 — Pulse Width Modulator (PWM)
Simulation support for this peripheral or feature is comprised of:
These simulation capabilities are described below.
Pulse Width Modulator (PWM) Dialog
The Pulse Width Modulator dialog configures Pulse Width Modulator (PWM) simulation. When configured for PWM mode, the Timers (0 or 1) provide a basis for PWM outputs. Pulse period, pulse width, single and double edge controlled outputs are supported.
Match Channels The Match Channel group allows simulation of 6 single-edge controlled or 3 double-edge controlled PWM outputs. You may modify the seven Match Channels to configure these PWM outputs to suit your requirements. Selected Channel
of your data.