Phytec phyCORE-LPC3180

The phyCORE-ARM9/LPC3180 supports the industry's first 90nm ARM-9based microcontroller. The new 32-bit MCU high-performance, low power LCP3180 ARM926EJ-S device from NXP Semiconductors (founded by Philips) is the only ARM9 microcontroller that provides a vector floating-point co-processor and integrated USB OTG, as well as the ability to operate in ultra-low-power mode down to 0.9V. The on-board MMU supports major operating systems, including Linux which is the leading major embedded OS. Other chip-level features include 7 UARTs, SPI, I2C, a real-time clock with a separate power domain, and NAND Flash and DDR memory controllers. These features make the devices particularly suitable for automotive and industrial control applications as well as medical systems. * Single Board Computer in subminiature dimensions (60 x 53 mm) according to low EMI phyCORE specifications * NXP Semiconductors (founded by Philips) LPC3180 ARM926EJ-S controller (208 MHz) with VFP9 hardware vector floating-point coprocessor for speed and efficiency as well as 2x SPI, 2x I²C, 2x PWM, MMU and 3-channel/10-bit ADC * Controller and board-level signals extend to two high-density (0.635 mm) 100-pin Molex connectors on underside of SBC * SDRAM: 16 to 64 MB synchronous SDRAM, max. access time of 10ns, 32-bit organization * Flash: 16 to 128 MB NAND-Flash in 8-bit mode * Serial: 1 to 32 KB I²C-EEPROM * On-chip Real-Time Clock with Alarm function and battery back-up * On-chip USB Host/Device interface (can be used as USB-OTG in conjunction with external ISP1301 USB-OTG device) * 7x UARTs, 3x of which at RS-232 level (2x standard, 1x High-Speed with Handshake) * JTAG signals extend to edge connector * Industrial temperture range (-40°...+85°C)

http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM9-LPC3180.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.