Phytec phyCORE-ARM7/LPC229x

The phyCORE-ARM7/LPC229x module supports high-performance LPC2294, LPC2294 and LPC2200 ARM7TDMI-S™ processor-based devices from NXP.

The LPC2294 devices include up to four on-chip CAN nodes, and have other chip-level features which include emulation and embedded trace support, 256 KB Flash memory, an 8-channel 10-bit ADC, PWM channels and up to 9 external interrupt pins. The LPC2294 further boasts a 128-bit wide memory interface and a unique accelerator architecture enabling 32-bit code execution at maximum clock rate.

These features make the devices particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. With a wide range of additional serial communication interfaces, as well as a 10/100M-Bit Ethernet controller, the module is also suited for communication gateways and protocol converters. Flexible memory management of the phyCORE-LPC2294 enables the user to select a configuration based on the needs of their application, therefore optimizing costs.

phyCORE SBC modules are available in a variety of Rapid Development Kits that offer true rapid development solutions by providing all the necessary ingredients to jump start embedded designs. The kits include the phyCORE SBC module and Carrier Board, complete electronic documentation, schematics, demo applications, and third party industry-standard C compilers and embedded development environments for evaluation. A Rapid Development Kit for this board is available here.

http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM7-LPC229x.html

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.