New Micros, Inc. (NMI)

Evaluation Boards

The NMIS-0016 is a complete system that is ready to develop or run dedicated applications. Only the addition of the user program is required, in its internal EEPROM, or its battery backed RAM, or in a user-supplied ROM/EPROM/EEPROM. The NMIS-0016 makes a very cost effective solution as a development system for the 80535, particularly when small size and ease of development are required.

NMIY-0031

The NMIY-0031 evaluation board supports most 44-pin PLCC 8051-compatible devices. Features include:

8031 CPU (8051 Architecture)
1 Parallel Port
Full Duplex Serial Ch. RS-232, 422 or 485
Two 16-bit timers/counters
8K RAM
128K Address Space
Three 28-pin JEDEC memory sockets
Flexible address decoding, socket assignments
Three 34-pin JEDSTACK™ Vertical Stacking Connector SITES (Connectors available as option, or separately)
With VSC's installed acts as "motherboard"
Prototype site accepts peripheral direct mount, W/O needing VSC's

Tini2106_DKit

The Tini2106_DKit is an inexpensive development kit with DB9 serial connection, power on/off switch, reset switch, voltage regulators, and prototype area to add your own components such as Sensors, Sonars, HBridge, Opto, Relays, LED's, etc... to provide a quick turnaround and inexpensive prototype for robotic, automation, and industrial control applications.

Tini2131_DKit

The Tini2131_DKit is an inexpensive development kit with DB9 serial connection, power on/off switch, reset switch, voltage regulators, and prototype area to add your own components such as Sensors, Sonars, HBridge, Opto, Relays, LED's, etc... to provide a quick turnaround and inexpensive prototype for robotic, automation, and industrial control applications.

Tini2138_DKit

The Tini2138_DKit is an inexpensive development kit with DB9 serial connection, power on/off switch, reset switch, voltage regulators, and prototype area to add your own components such as Sensors, Sonars, HBridge, Opto, Relays, LED's, etc... to provide a quick turnaround and inexpensive prototype for robotic, automation, and industrial control applications.