 Evaluation Boards | |
| Home Products Events Support | |
Evaluation Boards
ARM Evaluation Boards
- ARM Board Comparison
- MCB2100 (ARM7)
- MCB2103 (ARM7)
- MCB2130 (ARM7)
- MCB2140 (ARM7)
- MCB2300 (ARM7)
- MCB2460 (ARM7)
- MCB2900 (ARM9)
- MCBSTR7 (ARM7)
- MCBSTR730 (ARM7)
- MCBSTR750 (ARM7)
- MCBSTR9 (ARM9)
- MCBSTM32 (Cortex-M3)
- MCBSTM32E (Cortex-M3)
C166 Evaluation Boards
C251/C51 Evaluation Boards
Keil, An ARM Company
Evaluation Boards
The Keil MCB167 Evaluation Board introduces you to the Infineon C167CR microcontroller with an on-chip CAN interface. This evaluation board includes a 4K-limited copy of the Keil C166 development tools.
The Keil MCB167NET Evaluation Board introduces you to the Infineon C167CR microcontroller, CAN, and TCP/IP (via the Crystal CS8900A Ethernet interface). This evaluation board includes a 4K-limited copy of the Keil C166 development tools.
The Keil MCB2100 Evaluation Board introduces you to the NXP (founded by Philips) LPC2100 family of microcontrollers based on the ARM7TDMI processor.
This board includes two serial interfaces, two CAN interfaces, and a JTAG interface for in-system debugging with the Keil ULink USB-JTAG adapter. It is based on the LPC2129 microcontroller, whose features include 256KB on-chip Flash ROM, 16KB RAM, Vectored Interrupt Controller, Two UARTs and a Watchdog Timer.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB2103 Evaluation Board is a versatile and flexible prototype board for all NXP (founded by Philips) LPC2101/02/03 ARM7 processor-based devices.
This board has a serial interface, and a JTAG interface for in-system debugging with the Keil ULINK USB-JTAG adapter. It is based on the LPC2103 microcontroller whose features include 2 UARTS, 32KB on-chip Flash ROM, 8K RAM and two 32-bit timers.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB2130 Evaluation Board is a versatile and flexible prototype board for all NXP (founded by Philips) LPC213x devices based on the ARM7TDMI-S processor.
The board has two serial ports and a JTAG interface for in-system debugging. It is based on the LPC2138 microcontroller whose features include 512KB Flash ROM, two SPI, two 8-ch 10bit ADC, Vectored Interrupt Controller, Two UARTs, and a Watchdog Timer.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB2140 Evaluation Board is a versatile and flexible prototype board for all NXP (founded by Philips) LPC214x ARM7 processor-based devices.
The board features two serial ports, a USB interface, an SD card interface and a JTAG interface for in-system debugging. It is based on the LPC2148 microcontroller whose features include 512KB on-chip Flash ROM, 32KB RAM, a Vectored Interrupt Controller, Two 10bit ADCs with 14 channels, Watchdog Timer, PWM unit and a Real Time Clock with optional battery backup.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB2300 Evaluation Board is a versatile and flexible prototype board for NXP (founded by Philips) LPC23xx devices based on the ARM7TDMI processor.
The board has two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, an LCD, a USB interface, an Ethernet interface, and eight LEDs. It is available in four different configurations and includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB2400 Evaluation Board is a versatile and flexible prototype board for the NXP (founded by Philips) LPC24xx devices based on the AMR7TDMI processor.
The board has two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, an LCD, a USB interface, an Ethernet interface, and eight LEDs. It is based on the LPC2468 microcontroller, whose features include 512KB on-chip Flash ROM, four UARTs, two PWM units, four 32-bit timers and a general-purpose DMA controller.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCB517AC Evaluation Board introduces you to the Infineon 80C517 Microcontroller and the Infineon 80C91 CAN controller. This evaluation board includes a 2K-limited copy of the Keil 8051 development tools.
The Keil MCB900 Evaluation Board is a versatile and flexible prototype board for the NXP (founded by Philips) P89LPC932 microcontroller.
The Keil MCB950 Evaluation Board is a versatile and flexible prototype board for the NXP (founded by Philips) P89LPC952/954 microcontroller.
The Keil MCBSTM32 Evaluation Board is a versatile and flexible prototype board for STMicroelectronics STM32 Cortex-M3 processor-based devices.
The board has a serial interface, analog input (via potentiometer), a CAN interface, an LCD, a USB interface, an SD card interface and a JTAG interface. It is based on the STM32F103 microcontroller whose features include 128KB Flash, two watchdogs, three 16-bit timers, 2 USARTs and two 12-bit A/D converters.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCBSTR7 Evaluation Board is a versatile and flexible prototype board for STMicroelectronics STR71x devices based on the ARM7TDMI processor.
The board has two serial interfaces, analog input (via potentiometer), a CAN interface, a USB interface, eight LEDs, and a JTAG interface for in-system debugging. It is based on the STR710FZ2 microcontroller, whose features include a Realtime Clock (RTC), four UARTs, four Timers, SmartCard Interface, Buffered Serial Peripheral Interfaces (BSPI), 2 I2C Interfaces and a 12-bit A/D Converter.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCBSTR730 Evaluation Board is a versatile and flexible prototype board for the STMicroelectronics STR73x devices based on the ARM7TDMI processor.
The board has two serial interfaces, two CAN interface, a speaker, an analog input via a potentiometer and a JTAG interface for in-system debugging. It is based on the STR730FZ2 microcontroller whose features include 256KB Flash ROM, 16KB RAM, a PLL, a Realtime Clock, four DMA controllers with 4 channels each, six 16-bit PWM modules and four UARTs.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCBSTR9 Evaluation Board is a versatile and flexible prototype board for the STMicroelectronics STR9 devices based on the ARM966E-S processor.
The board has two serial interfaces, a CAN interface, an SD card inteface, an Ethernet interface, a USB interface and a JTAG interface. It is based on the STR912FW44 microcontroller whose features include a Vectored Interrupt Controller, an External Memory Interface, three UARTs, four 16-bit Timers, 8-channel 10-bit A/D Converter and a 3-phase Induction Motor Controller.
This evaluation board includes the RealView Microcontroller Development Kit (MDK) Evaluation Tools.
The Keil MCBx51 Evaluation Board introduces you to the 8051 Microcontroller Family. This evaluation board includes a 2K-limited copy of the Keil 8051 development tools which include C Compiler, Assembler, Debugger, and Target Monitor.
The Keil MCBXC167 Evaluation Board introduces you to the Infineon XC167 microcontroller, CAN, and TCP/IP (via the Crystal CS8900A Ethernet interface). This evaluation board includes a 4K-limited copy of the Keil C166 development tools.
The Keil MCBXC866 Evaluation Board is a versatile and flexible prototype board for the Infineon XC866 microcontroller.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
