Systronix

DPB2

The DPB2 is the fastest way to develop a system with Dallas Secure Micros. The Systronix DPB2 development system adds a linear regulator, LCD and keypad interfaces, 8-bit ADC, 4 bits of digital input, 4 bits of high current open-drain output, and a large prototype area with colander ground plane. DPB2 accepts DIP40, SIMM40 and SIMM72 modules.

HSM320/HSM520

The HSM320/HSM520 evaluation boards support the Dallas DS80C320/DS87C520 and offer pushbuttons and LED indicators, 120 KBytes of NVRAM, and more. HSM320 accepts Intel HEX files over its RS232 serial port using the Systronix smart serial loader. The loader is both 320- and 520- aware.

HSM530

The HSM530 evaluation board supports the Dallas DS87C530. It is an adapter intended for use with the Systronix HSM320. It also plugs into ANY 8051 DIP40 socket. It enables you to PROGRAM the DS87C530 in a standard DIP40 device programmer, by making the C530 appear to be a C520 device (they use the same programming algorithm).

HSM550

The HSM550 evaluation board supports the Dallas DS87C550 and adds a low noise switching power supply, multi-layer circuit board, analog signal conditioning, precision analog reference, a 12-bit DAC, MicroLan/iButton port, temperature sensor, silicon serial number, SBX expansion, clock and calendar, pushbuttons and LED indicators, 120 KBytes of NVRAM, and more. HSM550 accepts Intel HEX files over its RS232 serial port using the Systronix smart serial loader.

uCAN2

The Systronix uCAN2 evaluation board supports the Dallas 390 and provides access to both on-chip CAN controllers.