Evaluation Boards
Home Products Download Events Support
Search Keil.com for:

Luminary Micro

Evaluation Boards

DK-LM3S9B96 Development Kit

Stellaris DK-LM3S9B96 Development Kit provides a feature-rich development platform for Ethernet, USB OTG/Host/Device, and CAN enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The development kit contains all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The Stellaris DK-LM3S9B96 Development Kit features: StellarisWare® Peripheral Library, USB Library, and Graphics Library in conjunction with ARM development tools from ARM tools partners.

Features

  • Stellaris LM3S9B96 MCU with fully-integrated Ethernet, CAN, and USB OTG/Host/Device
  • Bright 3.5" QVGA LCD touch-screen display
  • Navigation POT switch and select pushbuttons
  • Integrated Interchip Sound (I2S) Audio Interface
  • 8 MB SDR SDRAM module (attaches through the EPI signal breakouts)
  • MicroSD card interface
  • LM3S9B96 I/O available on labeled break-out pads
  • ARM® 10-pin JTAG debug connector with input and output modes
  • 1 GB MicroSD Card, 128 MB USB Flash Drive
  • Ethernet cable, CAN ribbon cable, USB and JTAG cables
  • CDs containing evaluation software tools, documentation, quickstart guide, StellarisWare Graphics, USB, and Peripheral Driver Libraries, and example source code

LM3S1968 Evaluation Kit

Stellaris LM3S1968 Evaluation Kits provide a compact and versatile evaluation platform for LM3S1000 Series Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.

The kits feature:

  • LM3S1968 Evaluation Board
  • Stellaris LM3S1968 MCU with 256K flash, 64K SRAM, 8 ADCs, and up to 52 GPIOs
  • Support for battery-backed hibernate mode
  • OLED graphics display with 128 x 96 pixel resolution
  • User LED, navigation switches, and select pushbuttons
  • Magnetic speaker
  • LM3S1968 I/O available on labeled break-out pads
  • Standard ARM® 20-pin JTAG debug connector with input and output modes
  • USB and JTAG cables
  • CD containing evaluation software tools, documentation, quickstart guide, Stellaris Peripheral Driver Library, and example source code

LM3S2965 CAN Evaluation Kit

The Stellaris LM3S2965 CAN Evaluation Kit provides a compact and versatile evaluation platform for CAN-enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The Stellaris LM3S2965 CAN Evaluation Kit is a fully operational CAN Network-in-a-box, with a quickstart sample application that includes a CAN network and CAN traffic.

Features:

  • Simple setup: USB cable provides serial communication, debugging, and power
  • LM3S2965 CAN Evaluation Board, with:
    • 50 MHz Stellaris LM3S2965 ARM Cortex-M3-based microcontroller with integrated CAN
    • 128x64 pixel 16-shade monochromatic OLED display
    • User-programmable push buttons and LED
    • Magnetic speaker
    • Convenient reset push button and power indicator LED
    • Serial in-circuit debug interface over USB
    • Powered over USB with included USB cable
    • Break-out pads for all LM3S2965 I/O
  • LM3S2110 CAN Device Evaluation Board, with:
    • 25 MHz Stellaris LM3S2110 ARM Cortex-M3-based microcontroller with integrated CAN
    • User-programmable push buttons and LED
    • Convenient reset push button and power indicator LED
    • Serial in-circuit debug interface over USB
    • Powered over CAN with included CAN cable
    • Break-out pads for all LM3S2110 I/O
  • Stellaris Peripheral Driver Library, which provides a convenient, no-hassle method of initializing, programming, and controlling peripherals on Stellaris microcontrollers
  • Stellaris CD packed with:
    • Evaluation version of the software tools
    • Complete documentation: datasheets, schematics, applications notes, and programming examples
    • Quickstart guide
    • Quickstart application source code, including a fully functioning CAN network
    • DriverLib and example source code

LM3S3748 USB Host/Device Evaluation Kit

The Stellaris® LM3S3748 Evaluation Board is a compact and versatile evaluation platform for the Stellaris LM3S3748 ARM® Cortex™-M3 based microcontroller. The evaluation board design highlights the LM3S3748 microcontroller's key features including a USB 2.0 full-speed (12 Mbps) Host/Device controller, Analog-to-Digital Converter (ADC), and serial interfaces. The LM3S3748 EVB has connectors for both embedded USB Host and USB Device operation. In USB Device mode, a small switch selects between bus-powered and self-powered options. Four ADC signals are paired as two differential channels to implement a 1 MS/s oscilloscope application on the LCD display. The oscilloscope feature set includes USB Host and Device connectivity as well as SD card support.

Kit Contents

  • LM3S3748 Evaluation Board
  • USB cables (1 each for device and debugger use)
  • USB flash memory stick
  • Four oscilloscope test leads for quickstart application
  • 20-pin JTAG/SWD target cable
  • CD containing:
    • Evaluation version of the software tools
    • Complete documentation
    • Quickstart guide and source code
    • Stellaris Peripheral Driver Library and example source code

LM3S6965 Ethernet Evaluation Kit

Stellaris LM3S6965 Evaluation Kits provide a compact and versatile evaluation platform for Ethernet enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.

The Stellaris LM3S6965 Ethernet Evaluation Kit features:

  • LM3S6965 Evaluation Board
  • Stellaris LM3S6965 microcontroller with fully integrated 10/100 (MAC+PHY) Ethernet controller
  • Simple setup: USB cable provides serial communication, debugging, and power
  • OLED graphics display with 128 x 64 pixel resolution and 16 shades of gray
  • User LED, navigation switches, and select pushbuttons
  • Magnetic speaker
  • All LM3S6965 I/O available on labeled break-out pads
  • Standard ARM® 20-pin JTAG debug connector with input and output modes
  • MicroSD card slot
  • Retracting Ethernet cable, USB cable, and JTAG cable
  • Quickstart sample application runs with or without Ethernet (direct connection to your PC), right out of the box, including an embedded web server
  • CD containing:
    • Evaluation version of the software tools
    • Complete documentation
    • Quickstart guide and source code
    • Stellaris Peripheral Driver Library and example source code

LM3S811 Evaluation Kit

Measuring just 3.5" by 1.5", the Stellaris LM3S811 Evaluation Kit is exceptional for its compactness and versatility, spanning the design spectrum from evaluation to prototyping to application-specific design by functioning as both an evaluation platform for the Stellaris LM3S811 microcontroller and a serial in-circuit debug interface for any Stellaris microcontroller-based target board.

The kit features:

  • LM3S811 Evaluation Board
  • 50 MHz Stellaris LM3S811 ARM Cortex-M3-based microcontroller
  • 96x16 pixel OLED display
  • User-programmable push button and LED
  • Convenient reset push button and power indicator LED
  • Thumbwheel potentiometer input to the on-chip ADC
  • Serial in-circuit debug interface over USB
  • Stellaris Peripheral Driver Library, which provides a convenient, no-hassle method of initializing, programming, and controlling peripherals on Stellaris microcontrollers
  • Stellaris CD packed with:
    • Evaluation version of the software tools
    • Complete documentation: datasheets, schematics, applications notes, and programming examples
    • Quickstart guide
    • Quickstart application source code
    • DriverLib and example source code

LM3S8962 Ethernet+CAN Evaluation Kit

Stellaris LM3S8962 Evaluation Kits provide a compact and versatile evaluation platform for Ethernet + CAN enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.

Kits feature:

  • LM3S8962 Evaluation Board
  • Stellaris LM3S8962 MCU with fully-integrated 10/100 embedded Ethernet controller
  • OLED graphics display with 128 x 96 pixel resolution
  • User LED, navigation switches, and select pushbuttons
  • Magnetic speaker
  • LM3S8962 I/O available on labeled break-out pads
  • Standard ARM® 20-pin JTAG debug connector with input and output modes
  • Standalone CAN device board using Stellaris LM3S2110 microcontroller
  • Ethernet cable, CAN ribbon cable, USB and JTAG cables
  • CD containing evaluation software tools, documentation, quickstart guide, Stellaris Peripheral Driver Library, and example source code

LM3S9B90 Evaluation Kit

The Stellaris® LM3S9B90 Ethernet+USB-OTG Evaluation Kit provides a low-cost evaluation platform for the LM3S9B90 ARM® Cortex™-M3-based microcontroller. The kit includes two boards: the EK-LM3S9B90 evaluation board, and an In-Circuit Debug Interface (ICDI) board. The evaluation board features a simple, streamlined design for 32-bit Stellaris-based application with industrial connectivity, highlighting the Stellaris LM3S9B90 microcontroller's simultaneous integrated 10/100 Ethernet MAC/PHY, full-speed USB-OTG interfaces, and convenient connection to the MCU's GPIO ports.

The Stellaris EK-LM3S9B90 Evaluation Board features:

  • Small form factor - just 36mm x 102mm
  • The Stellaris LM3S9B90 high-performance microcontroller with large memory
  • 32-bit ARM® Cortex™-M3 core
  • 256 KB main Flash memory, 96 KB SRAM, and ROM loaded with StellarisWare® software
  • Integrated 10/100 Ethernet MAC/PHY, USB OTG, CAN, and low-power hibernation module
  • Ethernet 10/100 port with two LED indicators
  • USB 2.0 Full-Speed OTG port
  • Virtual serial communications port capability
  • Oversized board pads for GPIO access
  • Reset pushbutton and power LED
  • User pushbutton and LED
  • Detachable In-Circuit Debug Interface (ICDI) board can be used for programming and debugging other Luminary Micro boards
Contact Site Map Press PrivacyCopyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved.