 |
Using the µVision Socket Interface
Application Note 198
Control and monitor µVision via the built-in TCP/IP interface
|
|
Using the µVision Socket Interface
Application Note 198
Control and monitor µVision via the built-in TCP/IP interface
|
Data Fields | |
| UINT32 | nType: 8 |
| UINT32 | nRes: 24 |
| UINT64 | EvNumber |
| UINT64 | tStamp |
| UINT32 | restartID |
| UINT16 | id |
| UINT16 | nValues |
| unsigned char | idx |
| unsigned char | ctx |
| unsigned char | recorderID |
| unsigned char | overflowL: 1 |
| unsigned char | reset: 1 |
| unsigned char | validID: 1 |
| unsigned char | last: 1 |
| unsigned char | complete: 1 |
| unsigned char | overflowH: 1 |
| unsigned char | irq: 1 |
| unsigned char | resume: 1 |
| UINT32 | payload [2] |
Event Recorder
Contains data from Event Recorder
This structure is used in the following messages:
Client <== uVision (Async)
| unsigned char RAW_EVENT::complete |
| unsigned char RAW_EVENT::ctx |
| UINT64 RAW_EVENT::EvNumber |
| UINT16 RAW_EVENT::id |
| unsigned char RAW_EVENT::idx |
| unsigned char RAW_EVENT::irq |
| unsigned char RAW_EVENT::last |
| UINT32 RAW_EVENT::nRes |
| UINT32 RAW_EVENT::nType |
| UINT16 RAW_EVENT::nValues |
| unsigned char RAW_EVENT::overflowH |
| unsigned char RAW_EVENT::overflowL |
| UINT32 RAW_EVENT::payload[2] |
| unsigned char RAW_EVENT::recorderID |
| unsigned char RAW_EVENT::reset |
| UINT32 RAW_EVENT::restartID |
| unsigned char RAW_EVENT::resume |
| UINT64 RAW_EVENT::tStamp |
| unsigned char RAW_EVENT::validID |
